Sale!

KEMIMOTO Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder …

Original price was: $25.99.Current price is: $21.24.


Upgraded Alligator Clamp-Patented Design: Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles
Easy to Install on 0.6″-1.5″ Pole: The alligator clamp of this kayak cup holder fits 0.6″-1.5″ diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
24oz Max Load Capacity: The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
With Tightening Drawstring: The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
Sturdy Fabric with 2 Separated Mesh Pockets: Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.


Price: $25.99 - $21.24
(as of Jul 27,2025 12:48:14 UTC – Details)



Upgraded Alligator Clamp-Patented Design: Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles
Easy to Install on 0.6″-1.5″ Pole: The alligator clamp of this kayak cup holder fits 0.6″-1.5″ diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
24oz Max Load Capacity: The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
With Tightening Drawstring: The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
Sturdy Fabric with 2 Separated Mesh Pockets: Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.

Customers say

Customers find the cup holder works well on various vehicles, including Yamaha Bear Tracker and Harley Davidson handlebars, and appreciate its heavy-duty clamp that holds up to weather conditions. The holder fits well, accommodating 30 oz Yeti cups, and stays securely in place while riding. They like its design, bright color, and consider it good value for money, with one customer noting it’s easy to add to handlebars.

13 reviews for KEMIMOTO Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder …

  1. Jim

    Perfect !
    Well made cup holder. Easy to install and stays attached,does not loosen up!

  2. Mike Fogleman Jr

    Will hold it ALL!
    Great, mounts easy, strong, sturdy, PERFECT!

  3. JK

    Can hold a large drink
    Large cup holder for my electric scooter. A little big but not annoying. Somewhat difficult to attach the clamp to the cup holder but my persistence prevailed. Now I can cruise down the street with my Iced Grande Latte.

  4. Casey205

    Very sturdy!!
    Works great! I put this on my Honda Navi mini moto. I tested it out and drove down to the store and bought a Gatorade and rode about 2 miles with it. It held fantastic and did not move.

  5. Eve S.

    Better than I expected!
    I was pleasantly surprised with the quality of this drink holder, given its affordable price. Very simple to install. I was concerned the drink holder would just be a heavy canvas, but it actually has structure with inner material. There is an existing bolt and lock-nut where the holder attaches to the mount. Mine was not fully tighten so double check. And there’s a velcro linner that exposes the bolt and point of attachment, which is nice. It’s large enough to hold a 30 oz Yeti cup. I will definitely buy again for our other ATVs.

  6. David

    Solid!! Bought to add to my camping chair.
    This works perfect for adding a cup holder to a camping chair!! Very sturdy and clamps well!

  7. rag3r0

    Stays on bike! Not the same for the drinks though…
    This holds onto my crash bars great, and the mesh is good for holding small tools. HOWEVER, this thing desperately needs a top retaining strap to go over drinks. Sometimes, I can get away with using the drawstring over the drink and hooked onto the clamp knob, but taller drinks are left up to chance. I’ve lost a mostly full small Viet iced coffee on the 101 South because the air picked it up just enough for it to tumble out.Straight-walled cups/bottles like thin Hydroflasks or my travel mug stay put, but anything with a taper, such as a fast food cup, tends to lift up with speed. Tightening the drawstring does not help as the tapered side just brings the drink higher, increasing the likelihood of beverage loss.

  8. zip

    Cup Holder
    Great cup holder. But would not work on my Tri-Glide.

  9. عبدالعزيز

    ليست مثيل في الصوره

  10. Hussain Alhosani

    سهل التركيب و حجمه مناسب

  11. Raúl

    Muy buena calidad de la tenaza y del portavasos de tela, es mejor de este material que los rígidos de plástico por que si tienes tu manillar original, son muy bajos a nivel del tanque lo que produce que al girar el manillar este pueda impactar con el portavasos, siendo de tela no le pasa nada al tanque ni al portavasos

  12. Abdulaziz

    Very excellent, and its installation is good. I did not lose in buying it because it is useful and of high quality

  13. Mike G.

    Comes loose, put lock tight on bolt

Add a review

Your email address will not be published. Required fields are marked *

Scroll to Top